ISA modem usr sportster & mandrake 10.0 community
Никак не получается настроить :(
После запуска pnpdump создает isapnp.conf & gone
Редактирую их как надо (под виндой у меня модем работает на ком 2, irq 3 и 0x02f8 порту).
В ответ на isapnp /etc/isapnp.conf выдает
Board 1 has Identity 5d c6 ec b1 94 50 20 72 56: USR2050 Serial No 3337400724 [checksum 5d]
/etc/isapnp.conf:47 -- Fatal - resource conflict allocating 8 bytes of IO at 2F8 (see /proc/ioports)
/etc/isapnp.conf:47 -- Fatal - Error occurred executing request '<IORESCHECK> ' --- further action aborted
В /proc/ioports напротив 0x02f8 стоит serial. Это значит, какое-то другое устройство претендует на этот порт? Но все остальное вроде бы нормально работает..
И еще проблема - hotplug конкретно виснет при выгружении после "отсоединения" usb устройств. Это бага нестабильной версии?
isapnp.conf
# $Id: pnpdump_main.c,v 1.27 2001/04/30 21:54:53 fox Exp $
# Release isapnptools-1.26
#
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of the output file format, see isapnp.conf(5)
#
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DHAVE_PROC -DENABLE_PCI -DHAVE_SCHED_SETSCHEDULER -DHAVE_NANOSLEEP -DWANT_TO_VALIDATE
#
# Trying port address 0273
# Board 1 has serial identifier 5d c6 ec b1 94 50 20 72 56
# (DEBUG)
(READPORT 0x0273)
#(READPORT 0x02F8)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
# Card 1: (serial identifier 5d c6 ec b1 94 50 20 72 56)
# Vendor Id USR2050, Serial Number 3337400724, checksum 0x5D.
# Version 1.0, Vendor version 0.0
# ANSI string -->U.S.Robotics Inc. Sportster 56000 Flash Internal <--
#
# Logical device id USR2050
# Device supports vendor reserved register @ 0x39
# Device supports vendor reserved register @ 0x3c
# Device supports vendor reserved register @ 0x3d
# Device supports vendor reserved register @ 0x3e
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE USR2050/3337400724 (LD 0
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# Fixed IO base address 0x02f8
# Number of IO addresses required: 8
(IO 0 (SIZE 8) (BASE 0x02f8))
# IRQ 3.
# High true, edge sensitive interrupt (by default)
(INT 0 (IRQ 3 (MODE +E)))
# Start dependent functions: priority acceptable
# Fixed IO base address 0x03f8
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x03f8))
# IRQ 4.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 4 (MODE +E)))
# Start dependent functions: priority acceptable
# Fixed IO base address 0x03e8
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x3e8))
# IRQ 3, 4, 5 or 7.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 3 (MODE +E)))
# Start dependent functions: priority acceptable
# Fixed IO base address 0x02e8
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x02e8))
# IRQ 3, 4, 5 or 7.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 3 (MODE +E)))
# End dependent functions
(NAME "USR2050/3337400724[0]{U.S.Robotics Inc. Sportster 56000 Flash Internal }")
(ACT Y)
))
# End tag... Checksum 0x00 (OK)
# Returns all cards to the "Wait for Key" state
(WAITFORKEY)
isapnp.gone
#------------------------------------------------------------------
#
# /etc/isapnp.gone
#
#------------------------------------------------------------------
#
# $Id: isapnp.gone,v 0.0 1998/10/09 20:46:01 fox Exp $
#
# This file contains a list of ISA resources that are unavailable
# for PnP allocation. This may be (for instance) because they are
# standard motherboard resources, or because there is a non-PnP
# ISA card using the resources, or a device driver hasn't been
# loaded yet, so there is no sign of the resources being in use
# in /proc/*
#
# This file should be editted to suit your local machine.
#
# Resources are:
# IO base[, size] (default size 8 if ommitted)
# IRQ n
# DMA n
# MEM base,size
#
#------------------------------------------------------------------
#
# Standard motherboard stuff
#
# COM1
#
IO 0x3f8,8
IRQ 4
#
# COM2
#
IO 0x2f8,8
IRQ 3
#
# COM3
#
#IO 0x3e8,8
#IRQ 3
#
# Parallel
#
#IO 0x378,2
#IRQ 7
#
# PS2 mouse
#
#IRQ 12
#
# Sound
#
#IO 0x220,16
#IO 0x330,2
#IO 0x388,4
#IRQ 5
#DMA 1
#DMA 5
После запуска pnpdump создает isapnp.conf & gone
Редактирую их как надо (под виндой у меня модем работает на ком 2, irq 3 и 0x02f8 порту).
В ответ на isapnp /etc/isapnp.conf выдает
Board 1 has Identity 5d c6 ec b1 94 50 20 72 56: USR2050 Serial No 3337400724 [checksum 5d]
/etc/isapnp.conf:47 -- Fatal - resource conflict allocating 8 bytes of IO at 2F8 (see /proc/ioports)
/etc/isapnp.conf:47 -- Fatal - Error occurred executing request '<IORESCHECK> ' --- further action aborted
В /proc/ioports напротив 0x02f8 стоит serial. Это значит, какое-то другое устройство претендует на этот порт? Но все остальное вроде бы нормально работает..
И еще проблема - hotplug конкретно виснет при выгружении после "отсоединения" usb устройств. Это бага нестабильной версии?
isapnp.conf
# $Id: pnpdump_main.c,v 1.27 2001/04/30 21:54:53 fox Exp $
# Release isapnptools-1.26
#
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of the output file format, see isapnp.conf(5)
#
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DHAVE_PROC -DENABLE_PCI -DHAVE_SCHED_SETSCHEDULER -DHAVE_NANOSLEEP -DWANT_TO_VALIDATE
#
# Trying port address 0273
# Board 1 has serial identifier 5d c6 ec b1 94 50 20 72 56
# (DEBUG)
(READPORT 0x0273)
#(READPORT 0x02F8)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
# Card 1: (serial identifier 5d c6 ec b1 94 50 20 72 56)
# Vendor Id USR2050, Serial Number 3337400724, checksum 0x5D.
# Version 1.0, Vendor version 0.0
# ANSI string -->U.S.Robotics Inc. Sportster 56000 Flash Internal <--
#
# Logical device id USR2050
# Device supports vendor reserved register @ 0x39
# Device supports vendor reserved register @ 0x3c
# Device supports vendor reserved register @ 0x3d
# Device supports vendor reserved register @ 0x3e
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE USR2050/3337400724 (LD 0
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# Fixed IO base address 0x02f8
# Number of IO addresses required: 8
(IO 0 (SIZE 8) (BASE 0x02f8))
# IRQ 3.
# High true, edge sensitive interrupt (by default)
(INT 0 (IRQ 3 (MODE +E)))
# Start dependent functions: priority acceptable
# Fixed IO base address 0x03f8
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x03f8))
# IRQ 4.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 4 (MODE +E)))
# Start dependent functions: priority acceptable
# Fixed IO base address 0x03e8
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x3e8))
# IRQ 3, 4, 5 or 7.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 3 (MODE +E)))
# Start dependent functions: priority acceptable
# Fixed IO base address 0x02e8
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x02e8))
# IRQ 3, 4, 5 or 7.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 3 (MODE +E)))
# End dependent functions
(NAME "USR2050/3337400724[0]{U.S.Robotics Inc. Sportster 56000 Flash Internal }")
(ACT Y)
))
# End tag... Checksum 0x00 (OK)
# Returns all cards to the "Wait for Key" state
(WAITFORKEY)
isapnp.gone
#------------------------------------------------------------------
#
# /etc/isapnp.gone
#
#------------------------------------------------------------------
#
# $Id: isapnp.gone,v 0.0 1998/10/09 20:46:01 fox Exp $
#
# This file contains a list of ISA resources that are unavailable
# for PnP allocation. This may be (for instance) because they are
# standard motherboard resources, or because there is a non-PnP
# ISA card using the resources, or a device driver hasn't been
# loaded yet, so there is no sign of the resources being in use
# in /proc/*
#
# This file should be editted to suit your local machine.
#
# Resources are:
# IO base[, size] (default size 8 if ommitted)
# IRQ n
# DMA n
# MEM base,size
#
#------------------------------------------------------------------
#
# Standard motherboard stuff
#
# COM1
#
IO 0x3f8,8
IRQ 4
#
# COM2
#
IO 0x2f8,8
IRQ 3
#
# COM3
#
#IO 0x3e8,8
#IRQ 3
#
# Parallel
#
#IO 0x378,2
#IRQ 7
#
# PS2 mouse
#
#IRQ 12
#
# Sound
#
#IO 0x220,16
#IO 0x330,2
#IO 0x388,4
#IRQ 5
#DMA 1
#DMA 5